Easily Configure TCP/IP on Your AIX System::::::
Summary: With AIX, you can configure your TCP/IP network with a single command, mktcpip. On other systems, setting up TCP/IP might involve creating and editing multiple files, executing a number of commands, setting various variables, locating values for persistence after reboot, and starting several daemons. The mktcpip command completes all the necessary TCP/IP configuration tasks for a typical system. The process is even easier when you use the System Management Interface Tool (SMIT) to prompt you for all necessary parameters to configure your network.
After you gather the prerequisite information, you can run the mktcpip command three ways: by using SMIT, the command line, or the Web-based System Manager.
Prerequisites::::::
Gather your network configuration information:
v IP address
v Host name
v Domain Name
v Subnetmask (optional)
v Name server (optional)
v Gateway address (optional)
Procedure::::::
Configuring TCP/IP is easiest when you use SMIT. On the command line, type the
following fast path:
smitty mktcpip
A dialog box requests which type of interface you plan to use. Then, SMIT builds a screen that lists each required value, as shown in the following example. After you fill in the fields with the network information that you have collected, the tool runs the mktcpip command in the background and makes the network available. Your task is finished.
If you prefer the command line approach, you can specify all the necessary
parameters in a single instruction, as shown in the following example:
mktcpip -h server1 -a 10.47.1.3 -m 255.255.0.0 -i en0 \ -n 9.3.240.2 -d itsc.austin.ibm.com -g 9.3.240.1 -s -C 0 -Ano If you prefer a more graphical interface, you can use the Web-based System Manager tool to complete this task. This tool uses icons, windows, and wizards to
guide you through the configuration. To start this interface, type the following on
the command line:
wsm
No matter which method you choose, online help is available to assist you. For example, to access online help within SMIT, use the F1 key. If you want to further configure your network, for example, if you want to select more than one interface type, SMIT has an easy interface for that, too. On the command line, type:
smitty configtcp
The following sections provide additional information to help you with configuring your network.
Further Configuration ::::
Customizing your TCP/IP configuration beyond the minimal configuration is easily done through SMIT, the command line, or the Web-based System Manager.
SMIT menus guide you through such tasks as:
v Managing static routes
v Flushing the routing table
v Setting or showing host names
v Managing network interfaces or drivers
v Managing domain names or the hosts table (/etc/hosts file)
v Managing network services for the client or server
v Starting or stopping TCP/IP daemons
Naming Conventions for Your Network Devices and Interfaces
When you install AIX, it automatically detects each adapter card and installs the corresponding interface software. AIX uses the following naming convention for network devices and interfaces:
Device Type Device Name Interface Name
Asynchronous Transfer Mode (ATM) atm# at#
Ethernet (IEEE 802.3) ent# et#
Ethernet (Standard, Version 2) ent# en#
Fiber Distributed Data Interface (FDDI) fddi# fi#
Loopback N/A lo#
Token-ring tok# tr#
The # sign represents the number of the device or interface you intend to use.
Name Services
If you use name services, you can provide the minimal information needed through the mktcpip command. Typically, the /etc/resolv.conf file stores your domain name and name server IP address. The mktcpip command creates or updates the /etc/resolv.conf file for you. By default, the resolver routines on hosts running TCP/IP use the following lookup sequence:
1. Domain Name Server (DNS)
2. Network Information Service (NIS or NIS+), if active
3. Local /etc/hosts file
But you can override the default lookup by editing the /etc/netsvc.conf file. (See the AIX Files Reference for details.) Also, you can set the NSORDER environment variable to override the host settings in the /etc/netsvc.conf file.
Gateways
A machine can communicate to the network through a gateway. A gateway contains the addressing and routing information for each host on its network, and can use routing daemons to broadcast routing information to, and receive routing information from, other gateways. TCP/IP routes information to the appropriate computer on the network using address information carried in a packet or stream of information.
AIX version 5.0 allows a host to discover if one of its gateways is down (called dead gateway detection) and, if so, choose a backup gateway, if one has been configured. Dead gateway detection can be passive (the default) or active. In passive mode, a host looks for an alternate gateway when normal TCP or ARP requests notice the gateway is not responding. Passive mode provides a ″best effort″ service and requires very little overhead, but there may be a lag of
several minutes before a dead gateway is noticed. In active mode, the host periodically pings the gateways. If a gateway fails to respond to several consecutive pings, the host chooses an alternate gateway. Active mode incurs added overhead, but maintains high availability for your
network. In either mode, the host chooses the alternate gateway with the lowest associated
cost value. You determine the cost value, using any criteria you wish, when configuring TCP/IP. The value can be any number from 0 (the default) to 2147482647.
Flags for the mktcpip Command :
The mktcpip command can do much more than minimal TCP/IP configuration.
The following table defines all the flags available for the mktcpip command.
-A yes/no Active dead gateway detection (AIX Version 5.0 and later). If set to no (the default), dead gateway detection remains in passive mode.
-a Address Sets the Internet address of the host. Specify the address in dotted decimal notation. Each network interface on the host should have a unique Internet address. The following is the
standard format for setting the Internet address: 127.10.31.2
-C number Specifies the cost of using the selected interface type. This value affects which alternate gateway is chosen when dead gateway detection (AIX Version 5.0 and later) determines the current gateway is down. The value can be any number from 0 (the default) to 2147482647.
-c Subchannel Specifies the subchannel address for a System/370 channel adapter.
-D Destination Sets the destination address for a static route. Specify the address in dotted decimal notation. The following is the standard format for setting the destination address for a
static route: 192.9.52.1
-d Domain Specifies the domain name of the name server the host should use for name resolution, if any. The domain name should be in the following format: Subbdomain.subdomain.rootdomain
-g Gateway Sets the gateway address for a static route. Specify the address in dotted decimal notation. The following is the standard format for setting the gateway address for a static
route: 192.9.52.0
-h Hostname Sets the name of the host. If using a domain naming system, the domain and any subdomains must be specified. The following is the standard format for setting the host name:
hostname The following is the standard format for setting the host name in a domain naming system: hostname.subdomain.subdomain.rootdomain
-i Interface Specifies a particular network interface, for example: tr0
-m SubnetMask Specifies the mask that the gateway should use in determining the appropriate subnetwork for routing. The subnet mask is a set of 4 bytes, as in the Internet address.
The subnet mask consists of high bits (1s) corresponding to the bit positions of the network and subnetwork address, and low bits (0s) corresponding to the bit positions of the host address.
-n NameserverAddress Specifies the Internet address of the name server that the host uses for name resolution, if applicable. The address should be entered in dotted decimal notation, for example: 127.1.0.1
-r RingSpeed Specifies the ring speed for a token-ring adapter. Valid values for the RingSpeed variable are either 4- or 16-Mbps.
-S Interface Retrieves information for System Management Interface Tool (SMIT) display.
-s Starts the TCP/IP daemons.
-t CableType Specifies cable size for Standard Ethernet or IEEE 802.3 Ethernet networks. Valid values for the CableType variable are dix for thick cable, bnc for thin cable, or N/A for Not
Applicable. The -t CableType flag should be used only for Standard Ethernet (en) and IEEE 802.3 Ethernet (et) interfaces.
TCP/IP Subsystems
The mktcpip command runs a shell script called rc.tcpip to start the TCP/IP
daemons for your configuration. The script contains start stanzas for the following
daemons:
autoconf6, ndpd-host Internet Protocol version 6 (IPv6)
dhcpcd, dhcprd,
dhrcpsd
Dynamic Host Control Protocol (DHCP) daemons
Easily Configure TCP/IP on Your AIX System
inetd Internet daemon that starts related services such as telnet and ftp
lpd Print server daemon
mrouted Multicast routing daemon
named Domain name server in a domain network
portmap Port lookup facility used for remote procedure calls (RPCs) routed or gated Dynamic routing (both daemons cannot run simultaneously) rwhod Remote uptime and users daemon sendmail Mail transfer agent snmpd, dpid2 Simple network management protocol (SNMP) daemons syslog Log server for standard UNIX error logs timed, xntpd Time synchronization daemons By default, the script starts the syslogd, portmap, inetd, lpd, and sendmail daemons and puts their entries into the /etc/inittab file so the subsystems begin automatically after every reboot. To automatically start any of the other listed daemons, simply uncomment their corresponding lines in the rc.tcpip file. You can add start stanzas for other daemons, too.
Useful TCP/IP References
Configuration, Status, and Troubleshooting Commands
lsdev -Cc adapter and
lsdev -Cc if
List system adapters and IP interfaces
netstat -in Show status of IP interfaces with numeric addresses
netstat -rn Show status of TCP/IP routes with numeric addresses
arp -a Display local ARP cache
no -a and no -o Display/set kernel variable values, such as ipforwarding
ifconfig and route Display status and configure temporarily
mkdev (chdev, rmdev, etc.) and SMIT Configure permanently
lsattr -El Display ODM database attributes for the specified interface or adapter
nslookup :Troubleshoot DNS
host: Resolve host name to IP address and vice versa
hostname :Display current local host name
System Files
/etc/hosts : Local hosts table
/etc/rc.* :Scripts for TCP/IP, NFS, and so forth
/etc/resolv.conf :Name resolver
/etc/netsvc.conf: Name resolution order
/usr/sample/tcpip/named.* : Sample files that can be copied and edited
/etc/named.*: DNS resolution files
/etc/hosts.equiv,
/etc/rhosts, and /etc/hosts.lpd :Remote user access files
